How to prevent damage to hardware stamping molds

The service life of the mold is related to many factors such as mold structure design, mold steel selection, heat treatment, surface treatment, mechanical processing and grinding, wire cutting process, stamping equipment, stamping materials and processes, mold lubrication, poor maintenance and repair level, etc. Among the various factors that cause mold failure, unreasonable mold structure and improper material selection account for about 25%, improper heat treatment accounts for about 45%, and process problems account for about 10%; Equipment issues, lubrication issues, and other factors account for approximately 20%. After the installation of Suzhou hardware stamping parts, attention should be paid to maintenance to prevent rust and corrosion. In daily use, it is necessary to close and open gently to prevent damage caused by hard closing and opening. The following creative editors of hardware stamping mold processing introduce how to prevent damage to hardware stamping parts:

Hardware stamping mold

1) The model, specifications, and performance of hardware accessories should comply with current national standards and relevant regulations, and match the selection of plastic steel doors and windows.

2) Double pulleys or rolling pulleys should be installed for sliding windows with a width exceeding 1 meter, or doors and windows with double glass installed.

3) The sliding hinge shall not be made of aluminum alloy material, but stainless steel material.

4) When installing hardware with fastening screws, a metal lining plate must be installed inside, and the thickness of the lining plate should be at least twice the pitch of the fastener. Do not fasten on plastic profiles or use non-metallic liners.

5) Hardware accessories should be installed, and door and window locks, handles, etc. should be assembled after the window and door leaves are inserted into the frame, ensuring the correct position and flexible opening and closing.